1. It can operate up to 16 stops in all sorts of operation (simple, automatic, down, with one button, going up and down with 2 buttons simplex, duplex).
2. Selection from simple to automatic operation of our lift and reversely, through a parameter which is in our control adjustments.
3. The security of entries and exits of the board with Tranzil materials of new technology makes it more resistant to short circuits.
4. Control cooperation with all sorts of doors (simple, bus door, automatic, rolls of doors etc.).
5. Potential cooperation with all sorts of electronic and electric valves and new types of valves with VVVF.
6. Support of the security valve A3 operation (directive EN-81-2 A3 2010).
7. It has an illuminated LCD screen, where the operations and the damages of the lift appear.
8. Long damage history, 99 damages which appear on our screen and reference to the floor where the malfunction occurred.
9. It has a security code for the prevention of unauthorised access.
10. The voltage of the pre-limit switches and safety circuit is 110vac for the prevention of voltage drop
11. Circuit voltage of position and call indicators 12vdc Γ(+) with possibility of alteration in any voltage depending on the operation of the lift. E.g. General (-),  -24 v etc.
12. Possibility to select the operation of the position indicator through the program from decimal to ABCD.
13. Possibility to select the adjustment of the parameters and the timers for the best adaptation of the implementation.
    
    
    Some are suggestively mentioned:
    
    
    • Selection of 2 different operation modes of the selector
    • Possibility of separate stop of up-down direction through timer
    • Selection to pre-open the doors
    • Possibility to select low speed on the first and last floor through magnetic counting sensor or through pre-limit switch
    • Flashing call sign on the arrival of the car on the chosen floor
    • Possibility to supervise the power relay through feedback




14. Intelligent reaction to magnetic sensors faults, in case there is loss of beat, it is automatically corrected on the next floor.
15. It has a safety board for re-leveling for restoration with open doors.
16. The panel’s equipment comes from world wide houses of electronic suppliers, such as SCHNEIDER ELECTRIC (TELEMECANIQUE), FINDER, ENSTO, CHINT, FUJI, DELTA, YASKAWA, OMRON.
17. The dimensions of the panel are 700mm x 850 mm x 240 mm with 2 doors and on customer’s demand a box of 650mm x 650 mm x 240 mm can be manufactured with one door.
18. All electronic designs, as well as the panel’s installation and programming guide necessary to the preparation of the technical documentation of the lift, are included on delivery.
19. Our company has certified products fully complying with the law EN 81-2 and directive 95/16 EK from (ΤUV HELLAS). No 08736087/002

1. It can operate up to 16 stops in all sorts of operation (simple, automatic, going down, with one button, going up and down with 2 buttons simplex, duplex).
2. Selection from simple to automatic operation of our lift and reversely, through a parameter which is in our control adjustments.
3. Use of smooth SOFT STARTER.
   
   
   
   • Smooth start of the lift
   • Smooth stop of the lift
   • Power saving of the lift (suitable for areas with power network problems).


4. The security of entries and exits of the board with Tranzil materials of new technology makes it more resistant to short circuits.
5. Control cooperation with all sorts of doors (simple, bus door, automatic, rolls of doors etc.)
6. Potential cooperation with all sorts of asynchronous motors.
7. Cooperation with all sorts of brakes.
8. It has an illuminated LCD screen, where the operations and failures of the lift appear.
9. Long damage history, 99 failures which appear on our screen and reference to the floor where the malfunction occurred.
10. It has a security code for the prevention of unauthorised access.
11. The voltage of the pre-limit switches and safety circuit is 110vac for the prevention of voltage drop.
12. Circuit voltage of position and call indicators 12vdc Γ(+) with possibility of alteration in any voltage depending on the operation of the lift. E.g. General (-),  -24 v etc.
13. Possibility to select the operation of the position indicator through the program from decimal to ABCD.
14. Possibility to select the adjustment of the parameters and the timers for the best adaptation of the implementation.
    
    Some are suggestively mentioned:
    
    • Selection of 2 different operation modes of the selector
    • Possibility of separate stop of up-down direction through timer
    • Selection to pre-open the doors
    • Possibility to select low speed on the first and last floor through magnetic counting sensor or through pre-limit switch
    • Flashing call sign on the arrival of the car on the chosen floor
    • Possibility to supervise the power relay through feedback


15. Intelligent reaction to magnetic sensors faults, in case there is loss of beat, it is automatically corrected on the next floor.
16. The panel’s equipment comes from world wide houses of electronic suppliers, such as SCHNEIDER ELECTRIC (TELEMECANIQUE), FINDER, ENSTO, CHINT, FUJI, DELTA, YASKAWA, OMRON.
17. The dimensions of the panel are 700mm x 850 mm x 240 mm with 2 doors.
18. All electronic designs, as well as the panel’s installation and programming guide necessary to the preparation of the technical documentation of the lift, are included on delivery.
19. Our company has certified products fully complying with the law EN 81-2 and directive 95/16 EK from (ΤUV HELLAS). No 08736087/001

1. It can operate up to 16 stops for all sorts of operation (simple, automatic, down, with one button, going up and down with 2 buttons simplex, duplex).
2. Selection from simple to automatic operation of our lift and reversely, through a parameter which is in our control adjustments.
3. The security of entries and exits of the board with Tranzil materials of new technology makes it more resistant to short circuits.
4. Control cooperation with all sorts of doors (simple, bus door, automatic, rolls of doors etc.).
5. Potential cooperation with all sorts of asynchronous and synchronous motors.
6. Cooperation with all sorts of brake types.
7. It has an illuminated LCD screen, where the operations and the failures of the lift appear.
8. Long damage history, 99 failures which appear on our screen and reference to the floor where the malfunction occurred.
9. It has a security code for the prevention of unauthorised access.
10. The voltage of the pre-limit switches and safety circuit is 110vac for the prevention of voltage drop.
11. Circuit voltage of position and call indicators 12vdc Γ(+) with possibility of alteration in any voltage depending on the operation of the lift. E.g. General (-),  -24 v etc.
12. Possibility to select the operation of the position indicator through the program from decimal to ABCD.
13. Possibility to select the adjustment of the parameters and the timers for the best adaptation of the implementation.
    
    Some are suggestively mentioned
    
    • Selection of 2 different operation modes of the selector
    • Possibility of separate stop of up-down direction through timer
    • Selection to pre-open the doors
    • Possibility to select low speed on the first and last floor through magnetic counting sensor or through pre-limit switch
    • Flashing call sign on the arrival of the car on the chosen floor
    • Possibility to supervise the power relay through feedback


14. Intelligent reaction to magnetic sensors faults, in case there is loss of beat, it is automatically corrected on the next floor.
15. Cooperation with all types of INVERTER.
16. Possibility of rescue device with the use of UPS on demand.
17. Power saving and long life limit of the motor and brake because of the electric stop.
18. The panel’s equipment comes from world wide houses of electronic suppliers, such as SCHNEIDER ELECTRIC (TELEMECANIQUE), FINDER, ENSTO, CHINT, FUJI, DELTA, YASKAWA, OMRON.
19. The dimensions of the panel depend on the implementation:
    
    
    • 850mm x 700mm x 280mm with 2 doors
    • 1000mm x 800mm x 250mm with 2 doors
    • 1000mm x 800mm x 300mm with 2 doors
    • 1100mm x 850mm x 250mm with 2 doors
    • 1100mm x 850mm x 300mm with 2 doors

Also available, special constructions for MRL (for implementations without machine room)

20. All electronic designs, as well as the panel’s installation and programming guide necessary to the preparation of the technical documentation of the lift, are included on delivery.
21. Our company has certified products fully complying with the law EN 81-2 and directive 95/16 EK from (ΤUV HELLAS). No 08736087/001

1. It can operate up to 16 stops for all sorts of operation (simple, automatic, down, with one button, going up and down with 2 buttons simplex, duplex).
2. Selection from simple to automatic operation of our lift and reversely, through a parameter which is in our control adjustments.
3. The security of entries and exits of the board with Tranzil materials of new technology makes it more resistant to short circuits.
4. Control cooperation with all sorts of doors (simple, bus door, automatic, rolls of doors etc.)
5. Potential cooperation with all sorts of asynchronous motors.
6. Cooperation with all sorts of brakes types.
7. It has an illuminated LCD screen, where the operations and the failures of the lift appear.
8. Long damage history of 99 failures which appear on our screen and reference to the floor where the malfunction occurred.
9. It has a security code for the prevention of unauthorised access.
10. The voltage of the pre-limit switches and safety circuit is 110vac for the prevention of voltage drop
11. Circuit voltage of position and call indicators 12vdc Γ(+) with possibility of alteration in any voltage depending on the operation of the lift. E.g. General (-),  -24 v etc.
12. Possibility to select the operation of the position indicator through the program from decimal to ABCD.
13. Possibility to select the adjustment of the parameters and the timers for the best adaptation of the implementation.
    
    Some are suggestively mentioned:
    
    • Selection of 2 different operation modes of the selector
    • Possibility of separate stop of up-down direction through timer
    • Selection to pre-open the doors
    • Possibility to select low speed on the first and last floor through magnetic counting sensor or through pre-limit switch
    • Flashing call sign on the arrival of the car on the chosen floor
    • Possibility to supervise the power relay through feedback

 

14. Intelligent reaction to magnetic sensors faults, in case there is loss of beat, it is automatically corrected on the next floor.
15. The panel’s equipment comes from world wide houses of electronic suppliers, such as SCHNEIDER ELECTRIC (TELEMECANIQUE), FINDER, ENSTO, CHINT, FUJI, DELTA, YASKAWA, OMRON.
16. The dimensions of the panel are 700mm x 850 mm x 240 mm with 2 doors.
17. All electronic designs, as well as the panel’s installation and programming guide necessary to the preparation of the technical documentation of the lift, are included on delivery.
18. Our company has certified products fully complying with the law EN 81-2 and directive 95/16 EK from (ΤUV HELLAS). No 08736087/001

1. It can operate up to 16 stops for all sorts of operation (simple, automatic, down, with one button, going up and down with 2 buttons simplex, duplex).
2. Selection from simple to automatic operation of our lift and reversely, through a parameter which is in our control adjustments.
3. The security of entries and exits of the board with Tranzil materials of new technology makes it more resistant to short circuits.
4. Control cooperation with all sorts of doors (simple, bus door, automatic, rolls of doors etc.).
5. Potential cooperation with all sorts of asynchronous motors.
6. Cooperation with all sorts of brakes types .
7. It has an illuminated LCD screen, where the operations and the failures of the lift appear.
8. Long damage history, 99 failures which appear on our screen and reference to the floor where the malfunction occurred.
9. It has a security code for the prevention of unauthorised access.
10. The voltage of the pre-limit switches and safety circuit is 110vac for the prevention of voltage drop
11. Circuit voltage of position and call indicators 12vdc Γ(+) with possibility of alteration in any voltage depending on the operation of the lift. E.g. General (-),  -24 v etc.
12. Possibility to select the operation of the position indicator through the program from decimal to ABCD.
13. Possibility to select the adjustment of the parameters and the timers for the best adaptation of the implementation.
    
    Some are suggestively mentioned:
    
    • Selection of 2 different operation modes of the selector
    • Possibility of separate stop of up-down direction through timer
    • Selection to pre-open the doors
    • Possibility to select low speed on the first and last floor through magnetic counting sensor or through pre-limit switch
    • Flashing call sign on the arrival of the car on the chosen floor
    • Possibility to supervise the power relay through feedback

 

14. Intelligent reaction to magnetic sensors faults, in case there is loss of beat, it is automatically corrected on the next floor.
15. The panel’s equipment comes from world wide houses of electronic suppliers, such as SCHNEIDER ELECTRIC (TELEMECANIQUE), FINDER, ENSTO, CHINT, FUJI, DELTA, YASKAWA, OMRON.
16. The dimensions of the panel are 700mm x 850 mm x 240 mm with 2 doors.
17. All electronic designs, as well as the panel’s installation and programming guide necessary to the preparation of the technical documentation of the lift, are included on delivery.
18. Our company has certified products fully complying with the law EN 81-2 and directive 95/16 EK from (ΤUV HELLAS). No 08736087/001

1.  Operations for mechanic and hydraulic lifts. 
2.  From 2 stops and above.
3.  The operation is through an electric circuit.
4.  The basic addition is that it is used for goods transport and not passengers.

Depending on the order it can have:

- Inverter vvvf
- Electronic selector
- Rescue device
- Magnet relay 
- Light relay 
- Timer for stops 
- Relay for doors – rolls

The entire electric connection between the Vassler control panel and the car is made only with a 24 channel flexible cable. Up to 15 stops with an ABCD position indicator, up to 10 stops with analog position indicator.

Serially converted :

-  Calls

-  Position indications

-  Indicators

-  Control signals

Advantages:

-  It is delivered with the preassembled button panel of the car.

- The time needed for the completion of the installation is notably reduced. (Very useful to the repairs of already installed lifts).

-  The cost is reduced, especially on the implementations with a lot of stops. 
-  The likelihood of possible faults during installation is reduced.

The battery charger recommended by our company is an easy and reliable solution, since it combines great convenience in adjusting to the panel of the lift, as well as protection in case of bad connection

The DISPLAY board has been manufactured by our company for reliable operation and easy installation in the external and internal button panels of the lift.

It has a position indicator and direction arrows of the lift.

The power supply of the board is from 9-24 VDC.

The digital entries are ABCD and it operates with a general ( + ) or/and general minus ( - ).

Voltage of Brake - Magnet :  110V DC και 48V DC

Power : 1.Έως 7,5 Kw

2.Έως 15 Κw

Safety Circuit : 110V AC

Battery : 4 rechargeable led batteries 12V 7,2Ah

Protection :  From circuit breakers, hypertension, overcurrent and total failure of batteries operation

Indications : For all the major operations and also for the proper or improper operation of batteries

Type of movement :  Continuous or discontinuous

Time of route : 2, 4, 7, 10 min

Speed of car movement in case of emergency

:  Possibility to select the frequency of the rescue device: 3Hz, 3,5Hz, 4 Hz, 5 Hz, 6 Hz, 8 Hz, 10 Hz, 12 Hz

The special constructions with MRL control apply to the lifts without machine room according to the European regulations, with the possibility to place the INVERTER outside the control. Moreover, the construction of the control panel is such that it can be placed on a visible spot.

The floor announcer with music and radio is a brand new product of Vassler Automations

TECHNICAL CHARACTERISTICS

• Power supply : 12-24v DC – AC
• Power consumption: 70 -350 mA
• Speaker: 8 Ω
• Microsd card: 2 GB ( More than 200 songs of your choice)
• entry: 60 Ω (the antenna is optional )

ADVANTAGES

• Selection of the announcement message ( eg. 1^st floor dentist, 2^nd floor general practitioner etc)
• Selection of any preferred language (Greek, English, French, Russian etc).
• Separate volume adjustment of message announcement and music
• Ability of cooperation with decimal or binary (ABCD) exits of position indicators
• Selection of placing in memory up to 6 desired stations
• Display of 4 digits and automatic station scanning for the best and easiest finding of stations
• Ability to change the station in memory in a time frame which we define through the board program (eg. every one hour the station is changed).

The gong board operates with 12v voltage, it offers the possibility to choose from 3 different sounds and it is easily adjusted to all types of lifts

Our company offers:

Magnetic stripe

• 200mm x 20mm x 5mm
• 1000mm x 20mm x 5mm

Square magnet

• 30 mm x 20 mm x 10mm

Round magnet

• D 20 mm x  Y 10mm

We offer:

- Pre-limit switch by the Italian company pizzato 3A at 400v, adjusted according to height with restoration.

- BISTABLE magnetic sensor 60VA at 230V (suitable for wells where there is no space)